LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 929 (Exterior Trim System (Service Information)) >> Exterior Equipment >> Underbody Trim Panel >> Tunnel Brace, Removing And Installing >> Removing

Tunnel Brace, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the expanding clip -9- from the left front cover -3-.

GWWA66-11802Courtesy of AUDI OF AMERICA, LLC

-- If equipped remove the expanding rivet -8-.

-- Remove the nuts -1 and 2-.

-- Remove the bolts -1, 3, 4 and 5-.

GWWA66-10842Courtesy of AUDI OF AMERICA, LLC

-- Remove the crossbrace -2-.