Overview - Rear Lid Spoiler
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Spoiler
- Removing and Installing. Refer to REAR LID SPOILER, REMOVING AND INSTALLING .
- Two-Sided Adhesive Tape
-- Remove the protective film after positioning the spoiler on the rear lid.
- Removal Aid
-- After the spoiler is positioned exactly on the rear lid, remove the protective film at the removing aids between the rear lid and the spoiler.
- Adhesive Tape
-- To prevent damage during removal, tape the rear lid in front of and behind the spoiler.
- Aid Line
-- To position the spoiler toward the rear on the rear lid.
-- When installing, align the spoiler on the side and position as shown toward the rear to the aid line (imaginary line) on the rear lid.