Overview - Front Heat Shield

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Front Heat Shield Exploded View

Courtesy of AUDI OF AMERICA, LLC

Nut
- 2.1 Nm
- Quantity: 4
Front Heat Shield
- For the tunnel center
- For vehicles with a TDI engine
- Removing and Installing. Refer to HEAT SHIELD FOR FRONT CENTER TUNNEL, REMOVING AND INSTALLING, VEHICLES WITH TDI ENGINE .
Spring Clamp
- Quantity: 3
Heat Shield
- For the longitudinal member
- Removing and installing on vehicles with a gasoline engine: left refer to LEFT LONGITUDINAL MEMBER HEAT SHIELD, REMOVING AND INSTALLING, VEHICLES WITH GASOLINE ENGINE , right refer to RIGHT LONGITUDINAL MEMBER HEAT SHIELD, REMOVING AND INSTALLING, VEHICLES WITH GASOLINE ENGINE
- Removing and installing on vehicles with a TDI engine: left refer to LEFT LONGITUDINAL MEMBER HEAT SHIELD, REMOVING AND INSTALLING, VEHICLES WITH TDI ENGINE , right refer to RIGHT LONGITUDINAL MEMBER HEAT SHIELD, REMOVING AND INSTALLING, VEHICLES WITH TDI ENGINE
Lock Washer
Nut
- 2.1 Nm
- Quantity: 4
Heat Shield
- For the tunnel center
- For vehicles with a gasoline engine
- Removing and Installing. Refer to HEAT SHIELD FOR CENTER TUNNEL, REMOVING AND INSTALLING, VEHICLES WITH GASOLINE ENGINE .
Left Heat Shield
- For the top of the tunnel
- There are different versions. Refer to the Parts parts information.
- Removing and Installing. Refer to HEAT SHIELD FOR LEFT UPPER TUNNEL, REMOVING AND INSTALLING .
Lock Washer
- Left: 2 washers, right: 3 washers
Right Heat Shield
- For the top of the tunnel
- There are different versions. Refer to the Parts parts information.
- Removing and Installing. Refer to HEAT SHIELD FOR RIGHT UPPER TUNNEL, REMOVING AND INSTALLING .
Lock Washer
- Quantity: 2
Heat Shield
- For the plenum chamber bulkhead
- Audi RS6 vehicles with additional vacuum line covering
- Removing and installing in vehicles with a gasoline engine. Refer to HEAT SHIELD, REMOVING AND INSTALLING, PLENUM CHAMBER BULKHEAD, VEHICLES WITH GASOLINE ENGINE .
- Removing and installing in vehicles with a TDI engine. Refer to HEAT SHIELD, REMOVING AND INSTALLING, PLENUM CHAMBER BULKHEAD, VEHICLES WITH TDI ENGINE .
Rear Heat Shield
- For the tunnel center
- For vehicles with a TDI engine
- Removing and Installing. Refer to HEAT SHIELD FOR REAR CENTER TUNNEL, REMOVING AND INSTALLING, VEHICLES WITH TDI ENGINE .