Drip Rail, Removing And Installing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
 Courtesy of AUDI OF AMERICA, LLC
|
- Pop Rivet
- Quantity: 5
- Rivet the guide rails starting at the top.
- Guide Rail
- To remove, drill out rivet heads -4- and drive them out.
- Drip Rail
- Press into the guide rail as far as the stop, beginning at the top and working toward the bottom.
- Make sure the transition to the A-pillar is flush.