LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 928 (Fuel System (Diesel - General & Service Information - CPNB - 1 Of 2)) >> 23 Diesel Fuel Injection >> Intake Manifold >> Intake Manifold, Removing And Installing >> Tightening Specifications

Tightening Specifications

WARNING: This page is about a different car, the 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Tighten the intake manifold bolts. .

-- Install the high pressure line, refer to HIGH PRESSURE LINES, INSTALLING .

-- Install the oil dipstick tube. .

-- Install the EGR pipe. .