Heated Oxygen Sensor And Exhaust Temperature Regulation Assembly Overview, Vehicles With Engine Code CGQB
WARNING: This page is about a different car, the 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Bank 2 Exhaust Gas Temperature Sensor 4 -G649-
- Removing and installing, refer to appropriate service information. .
- Coat the thread with hot bolt paste, refer to the Parts information.
- 45 Nm
- Pressure Pipe
- for the Differential Pressure Sensor -G505-
- 45 Nm
- Exhaust Gas Temperature Sensor 3 -G495-
- Removing and installing, refer to appropriate service information .
- Coat the thread with hot bolt paste, refer to the Parts information.
- Exhaust Gas Temperature Sensor 1 -G235-
- Removing and installing, refer to appropriate service information. .
- Coat the thread with hot bolt paste, refer to the Parts information.
- Heated Oxygen Sensor -G39- with Oxygen Sensor Heater -Z19-
- Removing and installing, refer to Heated Oxygen Sensor -G39- WITH Oxygen Sensor Heater -Z19-, REMOVING AND INSTALLING .
- Exhaust Gas Temperature Sensor 2 -G448-
- installed depending on the version
- Removing and installing, refer to Exhaust Gas Temperature Sensor 2 - G448-, REMOVING AND INSTALLING .
- Coat the thread with hot bolt paste, refer to the Parts information.
- Differential Pressure Sensor -G505-
- Removing and installing, refer to Differential Pressure Sensor -G505-, REMOVING AND INSTALLING .
- Exhaust Gas Temperature Sensor 4 -G648-
- Removing and installing, refer to appropriate service information. .
- Coat the thread with hot bolt paste, refer to the Parts information.