LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 794 (Anti-Theft System - Passive Anti-Theft System (Pats), Without Intelligent Access (IA)) >> Removal And Installation >> Passive Anti-Theft System (PATS) Transceiver >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2016 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.

  1. 1.

    Remove the 2 screws and the lower steering column shroud.

  1. 2.

    Disconnect the Passive Anti-Theft System(PATS) transceiver electrical connector.

  1. 3.

    Remove the screw and the PATS transceiver.

  1. 4.

    NOTE: Replacement of the PATS transceiver does not require the PATS keys to be programmed into the Instrument Cluster(IC) again.

    To install, reverse the removal procedure.

scientia non olet · About LEMON Manuals