Transmission Output Shaft Ball Bearing, Replacing: Removing
WARNING: This page is about a different car, the 2015 Audi Q5, 2014 Audi Q5, and 2013 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the center differential housing, refer to CENTER DIFFERENTIAL, REMOVING AND INSTALLING .
-- Remove the locking ring -A- on the transmission output shaft and the ball bearing locking ring -B-.
-- Remove the transmission output shaft and the transmission output shaft seal from the center differential housing, refer to TRANSMISSION OUTPUT SHAFT, REMOVING AND INSTALLING .
-- Remove the transmission output shaft ball bearing.