Coolant Pump Toothed Belt, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Audi Q5, 2016 Audi Q5, 2015 Audi Q5, 2014 Audi Q5, and 2013 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the small coolant pipe, refer to SMALL COOLANT PIPE, REMOVING AND INSTALLING .
-- Remove the bolts -arrows- and remove the toothed belt cover.
CAUTION:
The threads could be damaged.
- The drive gear bolt has a left thread.
-- Loosen the bolt on the coolant pump drive wheel -1- clockwise in direction of -arrow- and unscrew it 3 turns using the Torque Wrench 1410 VAG1410 and the Torque Wrench 1331 Insert - Ring Wrench - 12mm T10360.
-- Remove the toothed belt -2-.