Overview - Bumper Cover, Multi-Piece Version, AUDI Q5
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
- Front Spoiler
- Removing and installing. Refer to ATTACHMENTS, REMOVING AND INSTALLING .
- Bolt
- 2.5 Nm
- Bumper Cover End Plate
- Removing and installing. Refer to BUMPER COVER END PLATE, REMOVING AND INSTALLING, AUDI Q5 .
- Connecting Piece
- Clipped into the radiator grille at the bottom
- Right Air Intake Grille
- Removing and installing. Refer to AIR INTAKE GRILLE, REMOVING AND INSTALLING, AUDI Q5 .
- Right Bumper Cover
- To remove, remove the bolts from the radiator grille, unclip the retainers on the bottom of the spoiler and remove the connecting piece.
- Radiator Grille
- Removing and installing. Refer to RADIATOR GRILLE, REMOVING AND INSTALLING .
- Bolt
- 2.5 Nm
- Left Bumper Cover
- To remove, remove the bolts from the radiator grille, unclip the retainers on the bottom of the spoiler and remove the connecting piece.
- Left Air Intake Grille
- Removing and installing. Refer to AIR INTAKE GRILLE, REMOVING AND INSTALLING, AUDI Q5 .