LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 657 (Bumpers) >> 63 Bumpers >> Front Bumper >> Air Intake Grille, Removing And Installing >> Air Intake Grille, Removing And Installing, AUDI Q5 S Line And AUDI Sq5 >> Removing

Air Intake Grille, Removing And Installing, AUDI Q5 S Line And AUDI Sq5: Removing

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing Air Intake Grille (Left Side)
GWWA63-10870Courtesy of AUDI OF AMERICA, LLC

Left Side: 

-- Pull the air intake grille -1- at the inner side out of the bumper cover using the Hook Tool T40207 -arrow-.

Right Side: 

Fig 2: Removing Air Intake Grille (Right Side)
GWWA63-10871Courtesy of AUDI OF AMERICA, LLC

-- Grasp the recessed handle -arrow A- and pull the air intake grille -1- at the inner side out of the bumper cover -arrow B-.

Center 

Fig 3: Removing Air Intake Grille (Center)
GWWA63-10713Courtesy of AUDI OF AMERICA, LLC

-- Remove the radiator grille. Refer to RADIATOR GRILLE, REMOVING AND INSTALLING, AUDI Q5 S LINE AND AUDI SQ5 .

-- Release the tabs -4- and retainers -3- -arrows-.

-- Remove the air intake grille -1- from the bumper cover -2-.