LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 653 (3.0L - Crankshaft & Cylinder Block - Engine Code(S): CPNB) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Ribbed Belt TENSIONER, Removing And Installing >> Removing

Ribbed Belt TENSIONER, Removing And Installing: Removing

WARNING: This page is about a different car, the 2016 Audi Q5, 2015 Audi Q5, and 2014 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Ribbed Belt Tensioner And Bolt
GWWA13-10868Courtesy of AUDI OF AMERICA, LLC

-- Remove the ribbed belt from the tensioner, refer to RIBBED BELT, REMOVING AND INSTALLING .

-- Remove the bolt -2- and remove the ribbed belt tensioner -1-.

scientia non olet · About LEMON Manuals