Special Tools
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Audi Q5, 2016 Audi Q5, 2015 Audi Q5, 2014 Audi Q5, and 2013 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Puller - Unit Injector T10055
- Locking Pin T10060A
- Seal Installer - Intermediate Shaft T10353
- Counterhold - Vibration Damper T10355
- Puller - Balancer Shaft T10394
- Assembly Tool T10531
- Counterhold Tool T10531/1
- Tensioning Pins T10531/2
- Turning Over Tool T10531/3
- Knurled Nut T10531/4
- Seal Installer - Sealing Flange Guide Sleeve T20097
- Belt Tensioner Locking Tool T40098
- Dial Gauge - 0-10mm VAS6079
- Shop Crane - Drip Tray VAS6208
- Press Piece - 31.5 mm VW418A
- Press Piece - 28x100mm VW421
- Pilot Drift VW222A
- Dial Gauge Holder VW387
- Counterhold - Flywheel 10-201
- Bearing Installer - Multiple Use 40-103