Vibration Damper, Removing And Installing Hybrid Vehicles: Notes
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Audi Q5, 2016 Audi Q5, 2015 Audi Q5, 2014 Audi Q5, and 2013 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Counterhold - Vibration Damper T10355
- Assembly Tool T10531
- Counterhold Tool T10531/1
- Tensioning Pins T10531/2
- Turning Over Tool T10531/3
- Knurled Nut T10531/4
The vibration damper bolt -A- connects the vibration damper -1- timing chain connection -2- and the crankshaft -3-. Before removing the bolt, the chain sprocket must be secured to the crankshaft as described as follows.