Overview - Balance Shaft
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
- Balance Shaft
- Removing and installing, refer to BALANCE SHAFT, REMOVING AND INSTALLING .
- Bolt
- Tightening specification: 60 Nm
- For loosening and tightening, use the Locating Pin T40116 as a counterholder
- Balance Shaft Transmission Side
- Can only be placed on the balance shaft in one position
- Gear Carrier
- Bolt
- Tightening specification: 13 Nm
- Balance Shaft Belt Pulley Side
- Can only be placed on the balance shaft in one position
- Bolt
- Tightening specification: 60 Nm
- For loosening and tightening, use the Locating Pin T40116 as a counterholder