Engine Oil Cooler, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi A4 Quattro, 2014 Audi A4 Quattro, and 2013 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal while noting the following:

NOTE:

Replace the gaskets and seals.

Secure all hose connections with hose clamps of the same type as those equipped by the factory.

-- Install the engine oil cooler -3- with a new seal -2-.

Fig 1: Identifying Oil Cooler, Bolts And Seal

Courtesy of AUDI OF AMERICA, LLC

-- Install the accessory assembly bracket. Refer to AUXILIARY COMPONENTS BRACKET, REMOVING AND INSTALLING .

-- Fill with coolant. Refer to COOLANT, DRAINING AND FILLING .

-- Fill with oil and check the oil level. Refer to ENGINE OIL, FILLING AND CHECKING LEVEL .