Electric Coolant Pump, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi A4 Quattro, 2015 Audi A4, and 2014 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Air Intake Hose Components

Courtesy of AUDI OF AMERICA, LLC

-- Loosen the hose clamps -arrows- and remove the air guide hose.

NOTE:

Ignore item -1-.

NOTE:

Lay a cloth below the coolant pipe to catch escaping coolant.

Fig 2: Identifying After-Run Coolant Pump Electrical Connector

Courtesy of AUDI OF AMERICA, LLC

-- Clamp off and remove the coolant hoses -arrows- with Hose Clamps - Up To 25mm 3094.

-- Disconnect the connector -2-.

-- Remove the bolt -1- and the After-Run Coolant Pump -V51-.