Right Flange Shaft, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2016 Audi A4, 2015 Audi A4, 2014 Audi A4, 2013 Audi A4, and 2012 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
- The transmission is removed and mounted horizontally to the engine/transmission holder. Refer to SECURING ON ENGINE AND TRANSMISSION HOLDER .
-- Remove right flange shaft by fastening Puller - Flanged Shaft T10037 to transmission housing -arrow-.