Transmission Output Shaft Seal, Replacing, Transmission Output Shaft And Splines With Vibration Damper
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2015 Audi S4, 2015 Audi A4 Quattro, and 2014 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
The housing for the center differential on vehicles with a vibration damper must be removed in order to replace the transmission output shaft seal with splines. Refer to CENTER DIFFERENTIAL HOUSING, REMOVING AND INSTALLING, ATTACHED DRIVESHAFT .
Replacing the shaft seal. Refer to TRANSMISSION OUTPUT SHAFT SEAL, REPLACING .