LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 568 (2.0L - Crankshaft & Cylinder Block - Engine Code(S): CAEB, CAED, CPMA & CPMB (Sedan)) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Auxiliary Components Bracket, Removing And Installing >> Auxiliary Components Bracket, Removing And Installing, Vehicles With Electro-Mechanical Power Steering >> Installing

Auxiliary Components Bracket, Removing And Installing, Vehicles With Electro-Mechanical Power Steering: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi A4 Quattro, 2014 Audi A4 Quattro, and 2013 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

-- Install the A/C compressor. Refer to A/C COMPRESSOR, REMOVING AND INSTALLING ON BRACKET .

-- Install the generator. Refer to GENERATOR and GENERATOR, REMOVING AND INSTALLING .

-- Install the ribbed belt. Refer to Ribbed Belt, Removing and Installing, Vehicles with Electro-Mechanical Power Steering .

NOTE: Used coolant cannot be used again.

-- Fill with coolant. Refer to COOLANT, DRAINING AND FILLING .

scientia non olet · About LEMON Manuals