Tightening Specification And Sequence
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 Audi A4 Quattro, 2015 Audi A4 Quattro, 2014 Audi A4 Quattro, 2013 Audi A4, and 2012 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Replaced the bolts for the ATF pan.
-- Tighten the bolts in three steps in the sequence shown:
Courtesy of AUDI OF AMERICA, LLC
| Stage |
Bolts |
Tightening Specification/Additional Turn |
| 1. |
-1 through 12- |
Install the new bolts by hand until the bolt heads touch |
| 2. |
-1 through 12- |
4 Nm |
| 3. |
-1 through 12- |
Tighten 45° further |