Installation [08/2013 - ]

WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.

INSTALL FRONT LUMBAR POWER SEAT SWITCH
1. Engage the 4 claws to install the front lumbar power seat switch to the front power adjuster shield.
INSTALL FRONT POWER SEAT SWITCH (w/ Seat Position Memory System) . Refer to INSTALLATION [08/2013 - ] - Step 1
INSTALL RECLINING POWER SEAT SWITCH KNOB (w/ Seat Position Memory System) See step 35
INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB (w/ Seat Position Memory System) See step 36
INSTALL FRONT POWER ADJUSTER SHIELD See step 37
INSTALL FRONT INNER NO. 1 SEAT CUSHION SHIELD See step 38
INSTALL FRONT SEAT ASSEMBLY
Refer to INSTALLATION [08/2013 - ]