Installation [08/2013 - ]

WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.

INSTALL FRONT SEATBACK HOOK
1. Install the 2 front seatback hooks to the lumbar support adjuster assembly.
INSTALL LUMBAR SUPPORT ADJUSTER ASSEMBLY
1. Engage the 2 guides to install the lumbar support adjuster assembly.
2. Engage the 4 claws.
3. Connect each connector and engage each clamp to the lumbar support adjuster assembly.
INSTALL FRONT SEATBACK EDGE PROTECTOR
1. Engage each claw to install the 2 front seatback edge protectors.
INSTALL SEATBACK CLIMATE CONTROL DUCT (w/ Climate Control Seat System) See step 12
INSTALL SEATBACK CLIMATE CONTROL BLOWER (w/ Climate Control Seat System) See step 13
INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD See step 23
CONNECT CONNECTOR (w/ Seat Heater System)
1. Engage the clamp.
2. Connect the connector.
INSTALL SEATBACK CLIMATE CONTROL COVER (w/ Climate Control Seat System) See step 24
INSTALL FRONT SEATBACK BOARD SUB-ASSEMBLY See step 25
INSTALL FRONT SEAT CUSHION SHIELD See step 30
INSTALL FRONT POWER ADJUSTER SHIELD See step 37
INSTALL FRONT INNER NO. 1 SEAT CUSHION SHIELD See step 38
INSTALL FRONT SEAT INNER CUSHION SHIELD See step 42
CONNECT FRONT SEATBACK BOARD SUB-ASSEMBLY (w/o Foot Light) See step 44
CONNECT FRONT SEATBACK BOARD SUB-ASSEMBLY (w/ Foot Light) See step 45
INSTALL POWER SEAT SWITCH ASSEMBLY (for Front Passenger Side with Power Seat Switch Assembly) See step 1
INSTALL FRONT SEAT ASSEMBLY
Refer to INSTALLATION [08/2013 - ]