Removal [08/2013 - ]
WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
- RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM
See step 1
- REMOVE AIR CONDITIONER PRESSURE SENSOR
- Disconnect the connector.
- Using a 27 mm deep socket wrench, remove the air conditioner pressure sensor.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002 TEXT IN ILLUSTRATION
NOTE:
Seal the openings of the disconnected parts using vinyl tape to prevent the entry of moisture and foreign matter.