LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (3.0L - Engine Mechanical, Engine Code(S): AVK, BGN) >> 17 Engine - Lubrication >> Lubrication system components, removing and installing >> Lubrication system components, removing and installing >> Notes

Lubrication system components, removing and installing: Notes

WARNING: This page is about a different car, the 2006 Audi A4, 2005 Audi A4, 2004 Audi A4, 2003 Audi A4, and 2002 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • If large quantities of metal shavings or abraded material are found in the engine oil while servicing the engine, the oil passages must be carefully cleaned to prevent resulting damage and the oil cooler must be replaced.
  • Oil level must not exceed max. marking - risk of catalytic converter damage!
  • Oil injector jet for piston cooling. See Figure.

Viscosity classes and oil specifications: 

Refer to Additional Information, Fluid Capacity Chart

scientia non olet · About LEMON Manuals