Customize Parameters [08/2013 - ]

WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.

CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM

HINT:

The following items can be customized.

NOTE:

When the customer requests a change in a function, first make sure that the function can be customized.
Record the current settings before customizing.

Customizing with the Techstream

Connect the Techstream to the DLC3.
Turn the power switch on (IG).
Turn the Techstream on.
Enter the following menus: Body Electrical / Tilt & Telescopic / Utility / Customize.

Select the setting by referring to the table below.

TILT & TELESCOPIC

Tester Display	Default	Content	Setting	Relevant ECU
Autoaway/Return function	ON	Turn on/off the auto away/return function	ON/OFF	Multiplex tilt and telescopic ECU