Inspection [08/2013 - ]

WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.

INSPECT OCCUPANT DETECTION SENSOR (SEPARATE TYPE FRONT SEAT CUSHION PAD)

Measure the resistance according to the value(s) in the table below.

Fig 1: Occupant Detection Sensor Connector End View

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Standard Resistance

Tester Connection	Condition	Specified Condition
1 - 3	Front passenger seat occupied	Below 100 Ω
1 - 3	Front passenger seat not occupied	1 MΩ or higher

TEXT IN ILLUSTRATION

*a	Component without harness connected (Occupant Detection Sensor (Separate Type Front Seat Cushion Pad))

If the result is not as specified, replace the occupant detection sensor (separate type front seat cushion pad).