Removing and installing tray, switch and cup holder

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Remove tray Removing and installing storage tray .
Remove cup holder Removing and installing cup holder .
Position a small flat-bladed screwdriver on top at the switch.

Fig 1: Prying Appropriate Switch Out Of Switch Mount

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Carefully pry appropriate switch out of switch mount - arrows -.
Disconnect connectors.