LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Suspension, Wheels, Steering) >> 42 - Rear suspension >> Stub axle carrier/wheel bearing housing and wheel bearing unit >> Wheel bearing housing (steel) - all wheel drive, servicing >> Pressing wheel bearing out of wheel bearing housing

Pressing wheel bearing out of wheel bearing housing

WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Pressing Wheel Bearing Out Of Wheel Bearing Housing
GW00019909Courtesy of VOLKSWAGEN UNITED STATES, INC.
NOTE:
  • Wheel bearing housing must rest on machined screw hole surface.
scientia non olet · About LEMON Manuals