LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (2.0L - Turbo Engine Mechanical, Engine Code(S): BPG, BWT) >> 17 - Engine - Lubrication >> Lubrication system components, removing and installing >> Lubrication system components, removing and installing

Lubrication system components, removing and installing

WARNING: This page is about a different car, the 2009 Audi A4, 2008 Audi A4, 2007 Audi A4, 2006 Audi A4, and 2005 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • If large quantities of metal particles or other deposits (caused, for example, by partial seizure of the crankshaft or connecting rod damage) are found in the engine oil, the oil passages must be cleaned thoroughly and the oil cooler replaced in order to prevent further damage from re-occurring.

Oil pressure, checking → Oil pressure and oil pressure switch, checking 

Viscosity classes and oil specifications: →

.

NOTE:
  • The engine is filled at the factory with engine oil complying to VW standard 502 00. This engine oil is designed for long maintenance intervals. The engine oils listed below may also be used.
  • The oil must be changed every 12 months or every 15,000 km and the Service Reminder Indicator (SRI) must be programmed accordingly. Procedure: → .
scientia non olet · About LEMON Manuals