LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (6-Speed Manual Transmission 0A3 All Wheel Drive, Internal Component Servicing) >> 34 - Controls, housing >> Transmission housing, servicing >> Transmission housing, servicing >> Remove input shaft needle bearing from transmission housing

Remove input shaft needle bearing from transmission housing

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2007 Audi S4, 2007 Audi RS 4, and 2006 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing Input Shaft Needle Bearing From Transmission Housing
GW00019260Courtesy of VOLKSWAGEN UNITED STATES, INC.

A - Support , e.g. Kukko 22/2

scientia non olet · About LEMON Manuals