Pulling roller bearing for output shaft out of transmission cover

WARNING: This page is about a different car, the 2008 Audi A4, 2007 Audi A4, 2006 Audi A4, and 2005 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Pulling Roller Bearing For Output Shaft Out Of Transmission Cover

Courtesy of VOLKSWAGEN UNITED STATES, INC.

A - Counter-support, e.g. Kukko 22/2

B - Internal puller 37... 46 mm, e.g. Kukko 21/6

NOTE:

Always replace needle roller bearing after pulling out.