Enable Conditions
WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
| Secondary Parameters | Enable Conditions |
| <Timer diagnosis> | |
| Battery voltage Ignition switch Elapsed time after starting the engine |
≥ 10.9 V OFF > 600 s |
| <Full count diagnosis & soaking timer IC setting diagnosis> | |
| Battery voltage Ignition switch |
≥ 10.9 V OFF |
| <Timer diagnosis (during soaking)> | |
| Battery voltage Ignition switch Number of wake-up |
≥ 10.9 V OFF < 3 time(s) |
| <Wake-up diagnosis> | |
| Ignition switch Wake-up activation time setting Time in the soaking timer IC |
ON Completed > 3600 s 3 time(s) |