Enable Condition
WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
ENABLE CONDITION REFERENCE CHART
| Secondary Parameters | Enable Conditions |
|---|---|
| A/F main learning system | In operation |
| Engine coolant temperature | ≥ 70°C (158°F) |
| Engine load change | ≤ 0.02 g/rev (0 oz/rev) |
| Learning value of EVAP cone. | < 0.1 |
| Cumulative time of canister purge after engine start | ≥ 20 s |
| Continuous period after canister purge starting | ≥ 29884 ms |
| Engine load | ≥ Value of Map 1 |
ENGINE SPEED SPECIFICATION CHART
| Engine speed (RPM) | Idling | 800 | 1200 | 1600 | 2000 | 2400 | 2800 | 3200 | 3600 | 4000 | 4400 |
| Measured value (g(oz)/rev) | na | 0.228 (0.01) | 0.22 (0.01) | 0.22 (0.01) | 0.22 (0.01) | 0.228 (0.01) | 0.23 (0.01) | 0.234 (0.01) | 0.242 (0.01) | 0.25 (0.01) | 0.25 (0.01) |