Enable Conditions
WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
ENABLE CONDITION REFERENCE CHART
| Secondary Parameters | Enable Conditions |
|---|---|
| < Timer diagnosis & full count diagnosis | & soaking timer IC setting diagnosis > |
| Battery voltage | ≥ 10.9 V |
| Ignition switch | OFF |
| Elapsed time after starting the engine | >600s |
| < Timer diagnosis (during soaking) > | |
| Battery voltage | ≥ 10.9 V |
| Ignition switch | OFF |
| < Wake-up diagnosis > | |
| Ignition switch | ON |
| Wake-up activation time setting | Completed |
| Time in the soaking timer IC | > 18000 s |