LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 210 (Diagnostic Trouble Code (DTC) Detecting Criteria (H4DO)) >> Diagnostic Trouble Code (DTC) Detecting Criteria >> DTC P0852 Neutral Switch Input Circuit High (Mt Model) >> Diagnostic Method

Diagnostic Method

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
JUDGMENT VALUE REFERENCE CHART

Malfunction Criteria Threshold Value
Neutral switch signal (while changing from a to b below) HIGH (OFF) continues.
Driving condition change
  1. Engine speed 600 rpm - 900 rpm & Vehicle speed = 0 km/h (0 MPH)
  2. Engine speed 1600 rpm - 2550 rpm & Vehicle speed > 64 km/h (39.8 MPH)
From a) to b)

Time Needed for Diagnosis:  3 time(s)

Malfunction Indicator Light Illumination:  Illuminates when malfunction occurs in 2 continuous driving cycles.

JUDGMENT VALUE REFERENCE CHART

Malfunction Criteria Threshold Value
Neutral switch signal (while changing from a to b below) Changes to LOW (ON).
Driving condition change
  1. Engine speed 600 rpm - 900 rpm & Vehicle speed = 0 km/h (0 MPH)
  2. Engine speed 1600 rpm - 2550 rpm & Vehicle speed > 64 km/h (39.8 MPH)
From a) to b)

Time Needed for Diagnosis:  Less than 1 second