Enable Conditions

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

ENABLE CONDITION REFERENCE CHART

Secondary Parameters

Enable Conditions

Activation of soaking timer

Completed

Battery voltage

≥ 10.9 V

Ignition switch

OFF

Engine coolant temperature

≥ 4.4°C (39.9 °F)
and
<45°C(113°F)

Intake air temperature

≥ 4.4°C (39.9 °F)
and
<50°C(122°F)

Atmospheric pressure

≥ 75 kPa (563 mmHg, 22.2 inHg)
and
< 110 kPa (825 mmHg, 32.5 inHg)

Fuel level

< 60 l (15.85 US gal, 13.2 lmp gal)

EVAP cone, learning during previous driving cycle

Done

Learning value of EVAP cone, during previous driving cycle

≤ 0.2

Accumulated purge amount during previous driving cycle

≥ Value of Map 1

Soaking timer IC diagnosis

Completed⁽¹⁾

⁽¹⁾	Engine running time of 600 s or more is required during previous driving cycle

ENGINE COOLANT TEMPERATURE REFERENCE CHART

Engine coolant temperature °C (°F)	0 (32)	25 (77)	50 (122)
Accumulated purge amount during previous driving cycle g(oz)	2700 (95.23)	2700 (95.23)	4450(156.95)