Installing bevel gears
WARNING: This page is about a different car, the 2005 Audi A4, 2004 Audi A4, 2003 Audi A4, and 2002 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
- Insert thrust washers for small bevel gear with a small amount of grease.
- Insert large bevel gears with correct shims. See Adjusting differential bevel gears
- Insert planet pinions turned through 180 ° and pivot into position (arrow).
- Insert threaded pieces.
- Installation position: Step toward large bevel gear
- Align thrust washers with hole.
- Drive small bevel gear shaft into final position and secure.