LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 201 (Emission Control Systems (Aux. Emission Control Devices) (H4DO)) >> Leak Check Valve Assembly >> Inspection >> Check Vacuum Pump

Check Vacuum Pump

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the battery positive terminal to terminal No. 3 and the battery ground terminal to terminal No. 4, and inspect the vacuum pump operation.
    CAUTION: Do not operate the vacuum pump for 5 minutes or more.
    Fig 1: Connecting Battery Positive Terminal To Terminal No. 3 And Battery Ground Terminal To Terminal No. 4
    G07664953Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals