Body Integrated Unit
WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
- On << Main Menu >> display, select {Each System Check}.
- On << System Selection Menu >> display, select {Integ. Unit}.
- After {Integ. unit} is displayed, select [OK].
- On << Integ. unit mode failure diag. >> display, select {Diagnostic Code(s) Display}.NOTE:
- For detailed operation procedures, refer to PC application help for Subaru Select Monitor.
- For detailed concerning DTC, refer to the List of Diagnostic Trouble Codes (DTC). < Refer to LIST , List of Diagnostic Trouble Code (DTC). >