Installed position of rear clamp
WARNING: This page is about a different car, the 2006 Audi A4, 2005 Audi A4, 2004 Audi A4, and 2003 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
- Install clamps so that ends of bolts are not below bottom circumference of clamps.
- Bolted connections on outside
- Align exhaust system stress-free → Exhaust system - vehicles with all wheel drive, aligning stress-free .
- Tighten bolted connections evenly to 40 Nm.