Purge Control Solenoid Valve 2

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Remove the collector cover.
Disconnect the ground cable from battery.

Fig 1: Disconnecting Ground Cable From Battery
Courtesy of SUBARU OF AMERICA, INC.
Remove the solenoid valve bracket assembly from the intake manifold.

Fig 2: Locating Solenoid Valve Bracket Assembly Mounting Bolt
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the connector and the vacuum hose from purge control solenoid valve 2.
Remove the purge control solenoid valve 2 from the solenoid valve bracket assembly.

Fig 3: Locating Purge Control Solenoid Valve
Courtesy of SUBARU OF AMERICA, INC.