LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 199 (Emission Control Systems (Aux. Emission Control Devices) (H4DOTC)) >> Purge Control Solenoid Valve >> Removal >> Purge Control Solenoid Valve 1

Purge Control Solenoid Valve 1

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the collector cover.
  2. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G07679851Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the bolts which secure purge control solenoid valve 1 to the intake manifold, and disconnect the connector from the purge control solenoid valve 1.
    Fig 2: Identifying Intake Manifold Mounting Bolt
    G07679852Courtesy of SUBARU OF AMERICA, INC.
  4. Disconnect the vacuum hose from purge control solenoid valve 1.
scientia non olet · About LEMON Manuals