LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 199 (Emission Control Systems (Aux. Emission Control Devices) (H4DOTC)) >> Pressure Control Solenoid Valve >> Removal

Pressure Control Solenoid Valve: Removal

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G07679875Courtesy of SUBARU OF AMERICA, INC.
  2. Lift up the vehicle.
  3. Disconnect connector (A) and evaporation hose (B) from the pressure control solenoid valve.
  4. Remove the nut (C) securing the bracket to the fuel tank and remove the pressure control solenoid valve together with the bracket.
    Fig 2: Identifying Connector, Nut And Evaporation Hose
    G07679876Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals