Oil Pressure Switch: Removal

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Remove the collector cover.
Disconnect the ground cable from battery.

Fig 1: Disconnecting Ground Cable From Battery
Courtesy of SUBARU OF AMERICA, INC.
Remove the generator from the bracket. < refer to REMOVAL , Generator.>
Disconnect the terminal from oil pressure switch.

Fig 2: Identifying Oil Pressure Switch
Courtesy of SUBARU OF AMERICA, INC.
Remove the oil pressure switch.

Fig 3: Identifying Oil Pressure Switch
Courtesy of SUBARU OF AMERICA, INC.