Special Tool

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

SPECIAL TOOL DESCRIPTION CHART

ILLUSTRATION	TOOL NUMBER	DESCRIPTION	REMARKS
Courtesy of SUBARU OF AMERICA, INC.	0920287002000 (Newly adopted tool)	REMOVER AND REPLACER	Used for removing and installing valve spring.
Courtesy of SUBARU OF AMERICA, INC.	398437700	OIL SEAL INSTALLER	Used for installing the front oil seal of engine.
Courtesy of SUBARU OF AMERICA, INC.	498277200	STOPPER SET	Used for installing automatic transmission assembly to engine.
Courtesy of SUBARU OF AMERICA, INC.	498457000	ENGINE STAND ADAPTER RH	Used for disassembling and assembling engine. Used together with ENGINE STAND (499817100) and ADAPTER (18362AA020).
Courtesy of SUBARU OF AMERICA, INC.	498457100	ENGINE STAND ADAPTER LH	Used for disassembling and assembling engine. Used together with ENGINE STAND (499817100) and ADAPTER (18362AA020).
Courtesy of SUBARU OF AMERICA, INC.	499765700	VALVE GUIDE REMOVER AND INSTALLER	Used for removing and installing valve guide.
Courtesy of SUBARU OF AMERICA, INC.	499765900	VALVE GUIDE REAMER	Used for reaming valve guides.
Courtesy of SUBARU OF AMERICA, INC.	499817100	ENGINE STAND	Used for disassembling and assembling engine. Used together with ADAPTER (18362AA020), ENGINE STAND ADAPTER RH (498457000) and LH (498457100).
Courtesy of SUBARU OF AMERICA, INC.	18252AA000	CRANKSHAFT SOCKET	Used for rotating crankshaft.
Courtesy of SUBARU OF AMERICA, INC.	18261AA010	VALVE OIL SEAL GUIDE	Used for press-fitting of intake valve guide stem seals and exhaust valve guide stem seals.
Courtesy of SUBARU OF AMERICA, INC.	18334AA000	PULLEY WRENCH PIN SET	Used for removing and installing the crank pulley. Used together with PULLEY WRENCH (18355AA000).
Courtesy of SUBARU OF AMERICA, INC.	18334AA020 (Newly adopted tool)	PULLEY WRENCH PIN SET	Used for removing and installing exhaust cam sprocket LH. Used together with PULLEY WRENCH (18355AA000).
Courtesy of SUBARU OF AMERICA, INC.	18334AA030 (Newly adopted tool)	PULLEY WRENCH PIN SET	Used for removing and installing water pump pulley and intake cam sprocket. Used together with PULLEY WRENCH (18355AA000).
Courtesy of SUBARU OF AMERICA, INC.	18350AA000	CONNECTING ROD BUSHING REMOVER AND INSTALLER	Used for removing and installing bushing at connecting rod small end.
Courtesy of SUBARU OF AMERICA, INC.	18353AA000	CLAMP PLIERS	Used for removing and installing the PCV hose. This tool is made by the French company CAILLAU. (code) 54.0.000.205 To make it easier to obtain, it has been provided with a tool number.
Courtesy of SUBARU OF AMERICA, INC.	18355AA000	PULLEY WRENCH	Used for installing and removing the water pump pulley. Used for removing and installing the crank pulley. Used for removing and installing intake cam sprocket and exhaust cam sprocket LH. Used together with PULLEY WRENCH PIN SET (18334AA030), PULLEY WRENCH PIN SET (18334AA000) or PULLEY WRENCH PIN SET (18334AA020).
Courtesy of SUBARU OF AMERICA, INC.	18362AA020 (Newly adopted tool)	ADAPTER	Used for disassembling and assembling engine. Used together with STAND (499817100), ENGINE STAND ADAPTER RH (498457000) and LH (498457100). Bolt used: M10 x 50 (SUBARU genuine Part No 010410500)
Courtesy of SUBARU OF AMERICA, INC.	18471AA000	FUEL PIPE ADAPTER	Used for inspecting the fuel pressure.
Courtesy of SUBARU OF AMERICA, INC.	18657AA030 (Newly adopted tool)	OIL SEAL INSTALLER	Used for installing the rear oil seal of engine. Used together with OIL SEAL GUIDE (18671AA020).
Courtesy of SUBARU OF AMERICA, INC.	18671AA020 (Newly adopted tool)	OIL SEAL GUIDE	Used for installing the rear oil seal of engine. Used together with OIL SEAL INSTALLER (18657AA030).
Courtesy of SUBARU OF AMERICA, INC.	18854AA000	ANGLE GAUGE	Used for angle tightening.
Courtesy of SUBARU OF AMERICA, INC.	42099AE000	QUICK CONNECTOR RELEASE	Used for removing the quick connector.
Courtesy of SUBARU OF AMERICA, INC.	42075AG690	FUEL HOSE	Used for inspecting the fuel pressure. NOTE: This is the SUBARU genuine part.
Courtesy of SUBARU OF AMERICA, INC.	18270KA010 (Newly adopted tool)	SOCKET	Used for installing and removing intake cam sprocket and exhaust cam sprocket.
Courtesy of SUBARU OF AMERICA, INC.	1B022XU0	SUBARU SELECT MONITOR III KIT	Used for various inspections.