LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 193 (Manual Transmission And Differential) >> Transfer Driven Gear >> Removal

Transfer Driven Gear: Removal

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the manual transmission assembly from the vehicle. < Ref. to REMOVAL , Manual Transmission Assembly. >
  2. Remove the back-up light switch & neutral position switch. < Ref. to REMOVAL , Switches and Harness. >
  3. Remove the transfer case together with the extension case assembly. < Ref. to REMOVAL , Transfer Case and Extension Case Assembly. >
  4. Remove the extension case assembly.
  5. Remove the transfer driven gear.
    Fig 1: Center Differential And Transfer Driven Gear
    G07665997Courtesy of SUBARU OF AMERICA, INC.
  6. Remove bearing outer races from the extension case and transfer case.
    Fig 2: Bearing Outer Races Of Extension Case And Transfer Case
    G07665998Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals