LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 193 (Manual Transmission And Differential) >> Transfer Driven Gear >> Installation

Transfer Driven Gear: Installation

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the bearing outer race to transfer case.
    Fig 1: Bearing Outer Race And Transfer Case
    G07665999Courtesy of SUBARU OF AMERICA, INC.
  2. Install the transfer driven gear.
    Fig 2: Transfer Driven Gear
    G07666000Courtesy of SUBARU OF AMERICA, INC.
  3. Select a thrust washer. < Ref. to INSTALLATION , Transfer Case and Extension Case Assembly. >
  4. Install the transfer case and the extension case assembly. < Ref. to INSTALLATION , Transfer Case and Extension Case Assembly. >
  5. Install the back-up light switch and the neutral position switch. < Ref. to INSTALLATION , Switches and Harness. >
  6. Install the manual transmission assembly to the vehicle. < Ref. to INSTALLATION , Manual Transmission Assembly. >
scientia non olet · About LEMON Manuals