LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 191 (Engine Controls (Diagnostics) (H4DOTC)) >> Malfunction Indicator Light >> Procedure

Malfunction Indicator Light: Procedure

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
MALFUNCTION INDICATOR LIGHT PROCEDURE CHART

1. Activation of malfunction indicator light. < Refer to ACTIVATION OF MALFUNCTION INDICATOR LIGHT , Malfunction Indicator Light.>
↓
2. Malfunction indicator light does not come on. < Refer to MALFUNCTION INDICATOR LIGHT DOES NOT COME ON , Malfunction Indicator Light.>
↓
3. Malfunction indicator light does not go off. < Refer to MALFUNCTION INDICATOR LIGHT DOES NOT GO OFF , Malfunction Indicator Light.>
↓
4. Malfunction indicator light does not blink. < Refer to MALFUNCTION INDICATOR LIGHT DOES NOT BLINK , Malfunction Indicator Light.>
↓
5. Malfunction indicator light remains blinking. < Refer to MALFUNCTION INDICATOR LIGHT REMAINS BLINKING , Malfunction Indicator Light.>
scientia non olet · About LEMON Manuals