LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 191 (Engine Controls (Diagnostics) (H4DOTC)) >> Drive Cycle >> Procedure >> Drive Cycled >> Diagnostic procedure >> Drift Diagnosis

Drift Diagnosis

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Make sure of the items below before starting the engine.
    • Engine coolant temperature is less than 30°C (86°F).
    • Remaining fuel is 10 6 l  (2.6 US gal, 2.2 Imp gal) or more.
    • Battery voltage is 10.9 V or more.
  2. Idle the engine until engine coolant temperature is at least 10°C (18°F) higher than it was when engine started.
  3. After the engine has reached the state of procedure 2), idle the engine for another 5 minutes or more.
scientia non olet · About LEMON Manuals